Because the enameled wire production machines are single-end pay-off and single-end take-up, there is no multi-end.
In fact, most of the “multi-threads” are produced by users-electronics factories. Enameled wire manufacturer During the laying-out process, the machine should be stopped every few minutes to replace the transformer skeleton. When the machine is stopped, the pay-off tension of some machines is not in place. Due to inertia, the upper coil collapses and presses the lower thread. When the machine is turned on again, the thread is pressed and the thread breaks. Formed the initial chaotic line.
If the thread cannot be used normally after the thread is broken, the spool must be removed from the winding machine for processing. Of course you can continue to use the processed one. However, in the process of dealing with the chaotic thread, if one thread is accidentally broken, it becomes three heads, and two threads are broken, it becomes five heads… In this way, the axis cannot be processed. The manufacturing process is returned to the warehouse, and the warehouse is returned to the production plant in the name of multiple threads. This is the process of “multi-thread” production and return. In fact, multiple thread ends are easy to handle: use a sharp blade to pick and break a few turns of thread, grab the broken thread and pull it up. Until a head appears.
 |
Enameled wire manufacturer a |
a