Imagen de avatar Gears and Shafts Steel Spur Gears
cardecorative

So what issues should be paid attention to when processing?

Therefore, rough machining should be carried out on a machine with greater power and less precision., it is generally arranged before mechanical processing. The location of the heat treatment process is arranged as follows: In order to improve the cutting performance of the metal, such as annealing, normalizing, quenching and tempering, etc.

In the machining process route, heat treatment procedures are often arranged.For some parts that require high machining accuracy. Machine tool processing. The above is the editor’s introduction to the problems that need to be paid attention to in Shenzhen mechanical processing. Rough machining is mainly to cut off most of the machining allowance and does not require high machining accuracy.

With the rapid development of the current era, Automotive Roll Forming Production Line people’s understanding of machinery and equipment has gone a step further., it is generally arranged after rough machining and before finishing. In order to eliminate internal stress, such as aging treatment, quenching and tempering treatment, etc., it is generally arranged after machining. So what issues should be paid attention to when processing? Let’s find out together.

Choose equipment reasonably. In order to improve the mechanical properties of parts, such as carburizing, quenching, tempering, etc. Because of the large amount of cutting during rough machining, the workpiece is subjected to large cutting force, clamping force, heat generation, and the machined surface has a significant work hardening phenomenon, there is a large internal stress inside the workpiece, if rough and rough machining Continuously, the precision of the parts after finishing will be quickly lost due to the redistribution of stress. Recently, people need to use Shenzhen machinery in their factories.

Tags:

Deja un comentario