The first step of AC installation will involve choosing a spot for your
air conditioner in your yard outside. In order to choose a good
location, you want to ensure that it is level, secure, out of direct
sunlight, not directly under a gutter, close to the homes electrical
panel, away from bushy plants that may limit air flow, and at least
three feet from a gas or electric meter. This will allow the condensing unit to communicate with the
main electrical panel in the home.
Some of the tools that you require for AC installation Air Cooler Manufacturers include an
L-square, sheet metal shears or benders, wire cutters, a wrench,
screwdrivers, tubing cutter, hole saws, tape measure, drill and drill
bits. The hole will also conduct pipes for
the air handler.
There are a number of local and federal building codes that must be
adhered to when installing electrical and mechanical devices. At this point, consult an
EPA-certified contractor to complete the AC installation. Next, you will cut an opening supply on the plenum in
order to mount the coil within it.
Installing the line set for an air conditioner can be a difficult task
and involves placement of two refrigerant lines that connect the
evaporator coil to the condensing unit.
Next, you need to cut a hole in the side of the house near the bottom of
the wall.Before you start your AC installation, there are a number of safety
guidelines to consider that you should be aware of. Local permits may also be necessary and
should be obtained before you begin work. Be sure that you know how to operate each of these tools before
you begin or consider consulting a professional.. Make sure that the
equipment you are using and installing meets safety guidelines and that
you are installing it according to the manufacturers instructions. Be sure to
research these if you are in doubt. After that, you need to hold the
evaporator coil inside with sheet metal shelving and cover the entire
thing. Clear the spot of bushes to ensure there are
ten to twelve inches between the unit and the side of the home. Proper safety gear including gloves
or goggles is vital to an installation process that does not require a
trip to the emergency room. Local codes will give you more
information if necessary