For the solution, please refer to the article on changing mouse click to double click. The second is that the dynamic and static electric shocks are often bumped, causing the surface of the static contacts to be not smooth, and there are many convex and concave points.
It is not easy to use one button, and it takes several times to press the button. For this kind of failure, we only need to use a very small file or fine sandpaper to smooth the surface. The third is that the mouse spring will become tired after long-term clicking, and the spring will be weak. It doesn’t have a crisp clicking sound like a new mouse when you press it down. We know that the main reason for the weak bounce is the mechanical deformation of the spring leaf.
The smaller the degree of the U-shaped arc of the leaf spring, the smaller its elastic force. Conversely, Waterproof Light Switch Manufacturers the larger the arc, the more bouncy it will be.Car ship type switch, the kind that is very common when the red light is on when it is turned on. The problem is that sometimes it can’t be turned off, it just can’t bounce back, and it often jumps out of the air switch.
There is a metal piece with a spring fulcrum in the middle. The spring displacement and the aging deformation of the plastic bracket make the switch inflexible. You can take it apart after power off to have a look. If the plastic part is not damaged, it may be restored.
The neutral line inside the car ship type switch is straight through and has nothing to do with the switch components. Therefore, if the switch trips the air switch, it is due to damage to the insulation layer of the neutral line of the car ship type switch. You can cut off the damaged section and re-wire it. Pay attention Insulation must be guaranteed.
fanswitch