The WireMac E is a CCS Stranded Wire, twin loop wire binding machine
with an electric punch and manual twin loop wire closer. The machine is
available with either a 2:1 pitch configuration (2 holes per inch) or
3:1 pitch configuration (3 holes per inch). These features make the
WireMac E an ideal choice for any organizations that works on
high-volume binding projects.
Features:
The Wiremac E Includes fully-disengageable die, allowing you to bind
virtually any sized document, while avoiding half-holes on the edge of
the paper on custom sized documents. In addition, the machine features
a continuous punching guide, which allows for punches on documents
longer than 14 inches. To do this, all you need to do is simply punch
the first side and then flip the document over and use the guide to
punch the remaining holes.
The Wiremac E includes a sizing guide on the front of the machine to
help you choose the right sized wire for document binding – every
single time – by comparing your document with the notches on the front
of the machine. This makes set-up a snap. The machine also features a
heavy-duty electric punch, that can punch 2 plastic or clear covers at
once, or 25 sheets per lift (though 22 sheets per lift is a more
realistic number). The Wiremac E uses a foot pedal activation switch,
allowing you to hold your documents with both hands while you punch.
A solid, heavy-duty wire closer evenly closes the wire along the width
of the book and includes a wire holder to assist in hanging pages on
the wire spines before closing and, depending on the configuration, the
Wiremac E is available in a 2:1 pitch, for documents between 5/8″ and
1-1/4″ thick, or a 3:1 pitch, designed for documents between 3/16″ and
9/16″ thick.
Limitations:
The Wiremac E is an extremely effective binding machine, but it does
have a few drawbacks. To begin with, the foot pedal on the Wiremac E is
the only punching mechanism, which is not nearly as convenient as a
punching switch for quickly binding a few documents. Those who work in
larger volumes may find a stand-alone wire closer with a modular punch
more productive, allowing two people to bind documents in an assembly
line fashion, potentially doubling productivity.
Construction:
With a heavy-duty metal construction., the WireMac E is built for
durability. It weighs almost 75lbs and is designed to handle any medium
to high volume binding application. With this type of construction you
know that the WireMac E is built to last.
The wire closer is also a solid component and easy use and to adjust.
The piece closes evenly along the entire length of the document – every
time, making it a very useful component. Both of the WireMac E models
include the same wire closer, which is capable of closing all sizes of
wire (both 2:1 pitch h and 3:1 pitch).
Recommendation:
The WireMac E is highly-recommended for a large organization that does
a lot of wire binding. The binder also works perfectly for a smaller
organization looking for one of the easiest twin-loop wire binding
machines available today. The WireMac E is truly an excellent option,
whether you are looking for a machine to handle low volumes or high
volumes. When you consider your binding options, consider the WireMac E
. This binding machine is a great solution for your needs. It is also
an excellent value for the money and could be the perfect machine for
you!
Tags: CCS Stranded Wire