ZHEJ @molding ?

activo hace 8 meses, 1 semana
  • ZHEJ ha escrito una nueva entrada en el blog: The overall mold manufacturing level in China can be improved.   hace 6 meses · Ver

    In addition to the reasonable cooperation of the mold with sufficient strength and toughness, the surface properties of the mold are crucial to the working performance and service life of the mold. These surface properties are: abrasion resistance, corrosion resistance, friction coefficient, fatigue properties, and the like. These performance improvements, which rely solely on the […]

  • ZHEJ ha escrito una nueva entrada en el blog: Too fine particles are prone to contamination and ‘bridge’ phenomenon   hace 6 meses, 2 semanas · Ver

    Too fine particles are prone to contamination and ‘bridge’ phenomenon. 3, the shrinkage rate is small, the shrinkage rate is too large, the product is prone to cracks or warpage. The plasticized molten material can be stored in the barrel for a long time, and the waste-free injection molding process can avoid waste. The thermosetting […]

  • ZHEJ ha escrito una nueva entrada en el blog: Mold heat treatment is an important process to ensure mold performance   hace 7 meses · Ver

    Mold heat treatment is an important process to ensure mold performance. It has a direct impact on the following properties of the mold: 1, the manufacturing precision of the mold: uneven transformation of the structure, incompleteness and excessive residual stress caused by heat treatment, resulting in deformation of the mold after heat treatment, assembly and […]

  • A successful hot runner mold application project requires multiple links to be guaranteed. The most important of these are two technical factors. One is the control of plastic flow, and the other is the control of plastic temperature. Control of plastic flow: Plastics should be flow balanced in the hot runner system. The gates should […]

  • ZHEJ ha escrito una nueva entrada en el blog: Basic knowledge and technical application of plastic mold   hace 8 meses, 1 semana · Ver

    The basic knowledge and technology of plastic molds The various tools and products used in our daily production and life range from the base of the machine tool to the outer casing of the machine, to the outer casing screws, buttons and outer casings of various household appliances. All have a close relationship with the […]

  • ZHEJ ahora es un usuario registrado   hace 8 meses, 1 semana · Ver