Imagen de avatar Best Electric Fat Bike
Zhejiang Hangpai Electric Vehicle Industry Co., Ltd

Notes on electric vehicles?

(1) When checking the circuit, turn on the power switch to check whether the circuit is unblocked, whether the connectors are firmly and reliably inserted, whether the fuse is working properly, especially whether the connection between the battery output terminal and the cable is firm and reliable. Faults should be eliminated in time.
(2) Before traveling, check the battery power, and judge whether the battery power is sufficient according to the mileage of the trip. If the battery is not sufficient, it should be properly assisted by human riding to avoid under-voltage operation of the battery.
(3) The working condition of the motor should also be checked before traveling. Start the motor and adjust its speed to observe and listen to the operation of the motor. If there is any abnormality, repair it in time.
(4) Before using electric bicycles, check the lights, horns, etc., especially at night. The headlights should be bright, and the beam should generally fall in the range of 5-10 meters in front of the front of the car; the horn should be loud and not hoarse; the turn signal should flash normally, the steering indicator should be normal, and the light flashing frequency should be 75-80 times per minute; The display should be normal.
(5) Before traveling, check whether the main fasteners are fastened, such as the fasteners for the horizontal tube, the vertical tube, the saddle, the saddle tube, the front wheel, the rear wheel, the bottom bracket, the lock nut, the pedal, etc. It should not be loosened. If the fasteners become loose or fall off, they should be tightened or replaced in time. The recommended torque of each fastener is generally: 18N.m for the handlebar, handlebar, saddle, saddle tube, front wheel, and pedals, and 30N.m for the bottom bracket and rear wheel.

Deja un comentario