iNGENET - La comunidad de la ingeniería mexicana

1. The standard load capacity of electric bicycles is 75 kg, and overloading should be avoided as much as possible. If you are overloaded, you should use manual riding and manual assist.
2. When using an electric bicycle in cold weather, you should try to drive with manual or electric assist; and also pay attention to the battery power and voltage indication. In general, when the weather is cold, the depth of discharge of the battery should be appropriately reduced, and it must not be driven under voltage. This is because when the weather is cold, the charging capacity and discharge capacity of the battery are reduced.
3. Electric bicycles are not afraid of rain and snow. However, the water level cannot exceed the lower edge of the electric wheel hub bearing seat when wading water to prevent damage to the motor caused by water ingress. After riding in rain or snow, wipe it off as soon as possible; if the electrical components are immersed in water, they should also be dried with a hair dryer. So as not to cause corrosion of iron parts, circuit leakage, short circuit and other faults.
4. When riding on rainy and snowy days, the driving speed should be reduced appropriately, and the braking distance should be increased to prevent side slips and turning around, so as not to endanger personal safety.
5. Electric bicycles should be kept away from the sun for a long time and should be stored in a cool place. Sunlight exposure will accelerate the aging of paint, plastic parts, rubber parts and electronic components, reducing their service life and reliability.