Check whether the oil level of the steering box is normal before use and during work. Use and maintenance a. b. The steering box has now achieved standardization and diversification of specifications. For formal use, no-load test must be carried out.
The steering box can only be installed on a flat, shock-absorbing and torsion-resistant support structure. b. Under normal operation, load and run gradually. The following editor will explain to you the installation, use and maintenance methods of the steering box! Installation of steering box a. Under any circumstances, it is not allowed to knock belt pulleys, couplings, pinions or sprockets into the output shaft with a hammer, as this will damage the bearings and shaft.
After the steering box is installed, check whether it is flexible.. The steering box is strictly prohibited to exceed the rated load.Steering box, also known as commutator and steering gear, is a power transmission mechanism, a series of reducers, and has a wide range of applications in the industrial field. If there is any, it should be removed. d. So what matters should be paid attention to before installing the steering box? Precautions before installation a. c.. Before use, replace the plug at the highest position with an exhaust screw plug to ensure that the gas in the body is exhausted when the steering box is running.
The steering box has now achieved standardization and diversification of specifications.Steering box, also known as commutator and steering gear, is a power transmission mechanism, a series of reducers, and has a wide range of applications in the industrial field. b. The operating temperature of the steering box is 0-40 ℃. Check whether the matching size of the hole connected with the steering box meets the requirements, Wholesale gear reducer and the hole tolerance should be H7. Before using the steering box, clean the installation shaft, and check whether the installation shaft has bruises and dirt
Tags: Wholesale gear reducer
planetaryreducerr