Imagen de avatar China High Elastic 450D Yarn
rawyarne

The structure of the water baffle has many forms

The groundwater with higher hardness should be treated first (physical or chemical), and then sent to the washing room after reaching the standard; or the method of winter irrigation and summer (water that meets the standard can only be recharged); or artificial refrigeration water. If the floating area of HIM Polyester Yarn ​​the compact spinning is too large, it is easy to cause the front rubber roller to press the grid ring.

Reasonable draft distribution is also an important factor to improve yarn quality. .. However, due to certain factors, the movement state of the whisker will change: such as the whisker shaking, jumping, shaking, uneven thickness. When the compact spinning process is selected, in addition to the critical draft ratio, the draft ratio in the rear zone can be appropriately increased, and the spindle speed can be appropriately increased, thereby increasing yarn output and improving efficiency. Because the distance is smaller with the hardness of water quality, the level of air temperature and the passage of time. Where is the appropriate distance between the baffles in hard water? Answer:

The structure of the water baffle has many forms, and the most commonly used in China are: four-fold ‘W’ type, corrugated type, serpentine and other forms, and the spacing of each form has multiple specifications. The secondary negative pressure of normal multi-cylinder dust collector is between 200Pa-400Pa, which is more reasonable.

The size of the floating area should be the same, the pressure bar should be in a moderate position, and the phenomenon of the roller before the pressure bar grinding and the long apron cannot occur. The life of the pump can be greatly improved after using the inverter. In general, the A186 series has 5 sets per group, and the maximum is no more than 6 sets. The normal use period of the front rubber roller is about 2 months. 50

Tags:

Deja un comentario