This connection China Screwless Terminal Blocks manufacturers has the characteristics of simple structure, compactness, small size, and easy miniaturization. This kind of connector has the characteristics of convenient and fast connection, and is also the earliest radio frequency connector connection form used in the world.
Because the performance of the connectors that have exceeded the service life has been significantly reduced, it is difficult to ensure the test accuracy and the credibility of the data if they are not replaced in time. Therefore, only by paying close attention to design, processing, and use, can the reliability of products be continuously improved. The reliability of electronic equipment is closely related to the quantity and quality of the components used.
A few of them are also plated with nickel. Finally, it was found that the size of the pin was enlarged. After plugging or unplugging one or two times, the jack is in a state of bulging. Connecting the outer conductor of the connector To sum up, we have conducted a more detailed analysis and discussion based on the common failure modes and mechanisms in the development and production of radio frequency coaxial connectors and cable assemblies over the past ten years.
As MIL-STD-785B pointed out, the focus of reliability engineering tasks should focus on the prevention, detection and correction of reliability design defects, weak links and process defects. So in fact, any kind of failure may cause the connector and the entire assembly to fail. Of course, design is the basis of reliability, so careful processing is also a very important link, because if processing is improper, even with a good design drawing, high performance and high performance will not be obtained. The result was mistakenly processed to φ0. Therefore, a good designer should be good at researching and solving reliability design defects and weak links in time, and eliminate unreliable factors in the bud.
universalblock