When coated with a thin wire, it is thickly coated and shrinks under surface tension to form a wavy or bamboo-shaped yarn. If there is a very fine burr on the wire, under the effect of surface tension, the burr is not easy to paint, but also easy to lose thinning, resulting in the pinhole of the Enameled Copper Wire.
If the round wire itself becomes elliptical, under the effect of additional pressure during painting, the paint liquid layer is thin at the two ends of the long axis of the ellipse, and thick at the two ends of the short axis, forming a significant non-uniform phenomenon, so the enameled wire is used The roundness of round copper wire should meet the requirements.
When bubbles are produced in the paint, the bubbles are the air entrapped in the paint during the agitation and feeding process. Due to the small specific gravity of the air, they are raised to the external surface by buoyancy, but the air cannot be maintained due to the surface tension of the paint. Break through the surface layer and remain in the paint. This liquid with air bubbles is applied to the surface of the wire and enters the enameled furnace. After heating, the air expands rapidly and it rushes out of the surface when the surface tension of the paint decreases due to heat. Enameled wire surface is not smooth.
If the surface of the copper wire is bright and clean, a layer of paint can be applied. If the surface is stained with oil, the contact angle between the wire and the paint interface is affected, and the paint solution turns the wire from wet to non-wet. If the copper wire is hard, the irregular alignment of the surface molecules on the paint will have less attraction to the paint, which is not conducive to the wetting of the copper wire by the paint solution.
Xinyu Enamelled Wire is an integrated industrial and trade enterprise specialized in enamelled wire with UL certification. We offer different types of enamelled wire, welcome your visit.
xin enamelled