They have the advantages of high heat resistance and resistance to deformation when heated. Our plastic bottle manufacturer suggests that phenolic resin can also be used to make phenolic laminates, which are characterized by high mechanical strength, good electrical properties, Plastic Buckets corrosion resistance, easy processing, and are widely used in low-voltage electrical equipment.Typical materials in thermosetting plastic bottles include phenolic, epoxy, amino, unsaturated polyester, furan, polysilicon ether and other materials, as well as newer polydipropylene phthalate plastics.
Aniline, epoxy, polyvinyl chloride, polyamide, polyvinyl acetal and other modified phenolic resins can also be used to meet the requirements of different applications.. The disadvantage is that the mechanical strength is generally not high, but the mechanical strength can be improved by adding fillers to make laminated materials or molded materials. Finally, the pattern of the bottles can play a The effect of non-slip, so does the geometric shape. Because the pressure of carbon dioxide is very large, if it is not cylindrical, it will cause uneven partial pressure and deformation. Most of the recesses in the middle are for the convenience of hand-holding, and there are no recesses.
The space between the cylindrical bottle and the bottle is very large. The concave-convex design at the bottom of the bottle can enhance the firmness. The middle of the bottle body can be designed with a bow shape, and the horizontal ‘rib’ can be added. Third, to coordinate with the packing during transportation. The grooves support the bottle body.. In short, practical and user-friendly. The texture of the bottle cap is easier to unscrew and grab. Second, the general bottle needs to be economical and suitable, and the image is novel. For example, mineral water is cheaper, so thinner plastics are used, and the most economical cylindrical shape is used.
The plastic of the beverage bottle is environmentally friendly and light and beautiful. The main reason is that when placed on the shelf with the shape of the hand, the understanding that the cylindrical shape is more space-saving is wrong. Generally, the bottles are made into various geometric shapes to reduce the space between the flats, to reduce the friction, collision and squeeze between the bottles, to achieve safety and save space.First, the plastic beverage bottle must be cylindrical
Tags: Plastic Buckets
basinmediums