The Fc type and FCD bearing can allow the shaft to generate a displacement in both directions between the shaft relative to the bearing housing. Inner ring or outer ringless cylindrical roller bearings, the inner ring and outer ring can be relatively moved axially, so it can be used as a free end bearing.
Among them, the cylindrical roller bearings are all in the following forms: single-row cylindrical roller bearings: single row cylindrical roller bearings are separable bearing, easy to install and disassemble, two ferrules can be tight, modified rollers and rolls The contact line between the road can reduce the stress concentration. The cylindrical roller bearings can be divided into different structures such as single row, double column and multi-column roller bearings depending on the number of columns of the rolling bodies.
NU0000 + HJ0000, NJ0000 + HJ0000, NUP0000 type bearing, axial displacement in the two directions of the inlet shaft or outer casing in the axial gap field of the imported bearing, and accept smaller bidirectional axial load cylindrical roller bearing Category cylindrical roller bearings belong to separation bearing, installation and disassembly is very convenient. NUP, NFP type NUP type bearing is a baffling side of the outer ring, and the inner ring side belt (fixed) single baffle,Clutch Release Bearing factory and the other side is a separable flat block.
This type of bearing has a compact structure, large rigidity, large load capacity, and has the advantages of moderate deformation after the load, and is especially suitable for machine tool spindle support. In addition to the large radial load and axial load, this structure can also withstand the tip torque, and therefore, it is often used as a fixed end bearing.However, there is also a portion of the polyamide forming cage. This type of structural bearing can limit the displacement of the shaft relative to the bearing housing in both directions. The FC type Fc type bearing consists of two outer rings and an inner ring.
bearingwater