In our daily life, many families feel messy, and there is a feeling that they will never be cleaned up. In fact, the main reason is the improper use of space, especially in our kitchens. The kitchen drawer storage box completely solves this problem. Of course, many people choose to buy a kitchen drawer storage box directly.
Introduction of kitchen drawer storage box
Storage box, nicknamed antique box, was used by the archaeological team to store the unearthed and sorted cultural relic fragments in the early days. Such boxes are generally strictly numbered, large and small, but most of them are the size of a shoe box (the unearthed cultural relics are generally heavier, plastic boot tray and the weight of the shoe box size is most suitable for transportation). In modern society, storage boxes have gradually evolved into boxes that are similar to “drug boxes”, which contain things.
How to make a kitchen drawer storage box
1. Cut the wrapping paper according to the area of the bottom of the box
The bottom of the box (lid). Cut out a piece of wrapping paper with the same size as the bottom area of the box body (lid), and stick the wrapping paper to the bottom of the box body (lid) with double-sided tape.
2. Paste wrapping paper
Fix the wide side wrapping paper of the box body, gently press the remaining wrapping paper on the wide side and paste it on the long side.
3. Glue the other half of the long side of the box body to form an isosceles trapezoid. Fold the isosceles trapezoid into the box and fix it.
Fourth, the box body
Cut out a piece of wrapping paper with a length equal to box length + box height × 4+1 cm and a width equal to box width + box height × 4+1 cm. Place the box body in the center of the wrapping paper and draw on the wrapping paper To extend the length and width of the box, make a mark 1 box height from the long side extension line to the corner of the box, and draw a straight line down from it as a starting point, then cut this straight line with scissors, and press the box with your hand Fold the wide side of the wrapping paper upwards, and paste the cut part on the inner wall of the box. Gently press the remaining wrapping paper on the wide side and paste it on the long side. Finally, an isosceles trapezoid will appear on the long side. Fold the trapezoid into the box and paste it.
5. Packing box cover
Cut out the box cover wrapping paper according to the method of cutting the box body wrapping paper. Place the box cover in the center of the wrapping paper, and draw the length and width extension lines of the box cover on the wrapping paper. Make a mark on the wide side extension line 1 box height from the corner of the box, and draw a straight line downward from it as the starting point. , And then cut this straight line with scissors, and fold the wrapping paper inward along the shorter side that is at right angles to it, so that the length and width of the wrapping paper are the same as those of the lid, and you can paste it directly.
Six, make partitions
Determine the number of partitions according to your own needs. The more the number, the more grids. The width of all partitions is equal to the height of the box, the length of the long partition (approximately) is equal to the length of the box, and the length of the short partition (approximately) is equal to the width of the box. If the thickness of the four sides of the box body is less than one millimeter, the partitions are cut according to the length and width of the box; on the contrary, the partitions are cut according to the length and width of the box body. After cutting the partition, use wrapping paper to glue both sides of it.
Seven, make a partition
The partitions should also have grooves for easy insertion, forming a partition frame. The number of grooves on each partition is equal to the number of partitions to be inserted. The width is the thickness of the partition, and the long partition is from the top. Cut 1/3 from the bottom and 2/3 from the bottom to the top of the short partition.
After reading the related introduction of the above article, I must have already understood the production method of kitchen drawer storage box. In fact, kitchen drawer storage box is very practical, not only can play a storage function, but also make the living environment look like Cleaner. There are many ways to make kitchen drawer storage boxes. We only introduce one of them today. If you want to know more about the production methods of kitchen drawer storage boxes, please continue to pay attention to our website. I hope to be helpful.
Tags: plastic boot tray
a