After positioning the slewing bearing radially, tighten the mounting bolts in a star shape and check the rotation of the bearing. Through the introduction of the article, we know the main points of the installation of Changzhou needle roller bearings. The slewing bearing is fastened with high-strength bolts during installation, and the fastening bolts must reach the required pre-tightening force. The pre-tightening force of different bolt diameters is in accordance with relevant regulations.
If the gap is too large, it should be machined again. Welcome to our Youcheng Bearings to purchase bearing equipment! We will still have a certain share in the Changzhou needle roller bearing market. As a kind of bearing, what should be paid attention to when installing needle roller bearings? Today we will take a look at the correct China Wheel Bearing factory installation method of Changzhou needle roller bearings, hope our introduction will be useful for the correct installation of bearings! When the needle roller bearing is installed, after the slewing bearing ceiling is in place, use a feeler gauge to check the flatness of the mating plane.
You can trust us!. Try to choose high-quality bearings In order to ensure the stable rotation of the bearing, the gear side clearance should be monitored and adjusted before the mounting bolts are fully tightened. The price of needle roller bearings is also different. If it is really impossible to process, it can be filled with plastic or partial gasket to avoid After the bolts are tightened, the slewing bearing is deformed, which affects the performance of the slewing bearing.As we all know, all kinds of bearings are the main parts of mechanical equipment, we need to understand them. The correct installation of the bearing can allow its normal operation and prevent deformation, etc
asdc