The working temperature is generally around -25 ℃ to 100 ℃, and the working temperature can be changed by changing the grease. The horizontal cycloid reducer is lubricated by oil pool under normal conditions, and the oil level can be kept in the middle of the oil window. When the working conditions are harsh and the ambient temperature is high, circulating lubrication can be used.
The cycloid reducer is generally lubricated with 40# or 50# mechanical oil at room temperature. In order to improve the performance of the reducer and prolong the service life of the cycloid reducer, it is recommended to use 70# or 90# extreme pressure gears Oil, Explosion-proof Gear motors Manufacturers lubricating oil should also be reconsidered when working in high and low temperature conditions.
The vertical installation of the planetary cycloidal pinwheel reducer should strictly prevent the oil pump from being cut off to avoid damage to the parts of the reducer. When refueling, you can turn the ventilation cap on the upper part of the base to refuel. When draining oil, unscrew the drain plug at the bottom of the base to drain the dirty oil. The reducer is shipped without lubricating oil inside. After the first refueling operation for 100 hours, the new oil should be replaced, (and the internal dirty oil should be washed clean) and then continue to work, and it should be replaced every six months (8-hour working system).
If the working conditions are bad, the oil change time can be shortened appropriately. Practice has proved that frequent cleaning and oil change of the reducer (such as 3-6 months) plays an important role in prolonging the service life of the reducer. Lubricating oil should be replenished frequently during use. The factory reducer has been lubricated and replaced every six months. The grease adopts aluminum disulfide-2# or 2L-2# lithium-based lubricating grease.
conicalreducer