Of course, in the process of dealing with the woven fabric, if the conditions permit, use both ways to use a better effect. So, what is better measures can be solved? Below we are analyzing and discussing this issue, hoping to provide some reference for everyone. For such a problem, we need to take some measures to handle it. Thereby, the concentration of the two remain within the appropriate range.
Another common method is the initial grooves, but when using this method, it is more stringent for the staff’s skill skills and empirical levels. There may be some problems during the upper dyeing period, such as uneven dyeing, deep color, chromatic aberration, ratio of color difference, tail color difference, color point, color shimming or bottom color. Combined with the actual work of the clove fabric for rolling treatment, due to its own characteristics.More serious is that sometimes there will be more serious running bars.
So far, in response to this problem, the methods used by different manufacturers have different, such as part of the manufacturers choose the overflow method for dyeing fabrics, which allows the co-cylinder and ink tanks to continuously circulate. Thus, this will cause the blended fabric Suppliers parallelism between them to achieve a balance, and thereby producing a large amount of color and the color difference between the model.
Once this happens, then it will often cause the front and rear color of the woven fabric, and the color difference is particularly obvious. First, if the woven fabric is found in the process of combining staining, the above problems have occurred, which is probably because there is a relatively significant color difference problem in these combined dyes
Tags: blended fabric Suppliers
cottontwill