Imagen de avatar miniature high speed bearing
deepgroovebearing

It is suitable for the hardness measurement of softer materials

agosto 18, 2020 por deepgroovebearing

01%, its code is Mechanical Bearing 6901 as σp0. Strength is divided into different forms of external force: Compressive strength: code σbc, which refers to the strength when the external force is under pressure. There are also multiple scales for […]

The gap is formed by a cylindrical rod and a cylindrical hole

agosto 5, 2020 por deepgroovebearing

Even if there is no medium pressure or the pressure is very small, the O-ring seal can be sealed by its own elastic force; when the cavity is filled with a pressurized medium, the O-ring seal will be displaced under […]

The bolt heads nuts and the connected parts should be in close contact

julio 28, 2020 por deepgroovebearing

K—torque coefficient, which can be 0. 5. For pins and pin holes that require high positioning accuracy, check their contact area before assembling, and they should meet the requirements of the equipment technical documents; if there are no regulations, 50%-75% […]

This contradiction is to divide polishing into two stages

julio 20, 2020 por deepgroovebearing

The surface damage formed by rough polishing is a secondary consideration, but it should be as small as possible; the second is fine polishing (or final polishing). The polishing cover and cover can prevent dirt and other debris from falling […]

The inner panel should not have cracks or cracks

junio 23, 2020 por deepgroovebearing

The fastening parts are loosened and the installation positions of the die are relatively changed. Remedy: If the hole still deflects after the workpiece is aligned, report to the squad leader and notify the mold repair. E adhere to a […]

The presence of moisture or water splashes are unavoidable

mayo 20, 2020 por deepgroovebearing

2Z——Bearings with dust cover are used for bearing configuration where pollution is not serious and there is no danger of moisture or steam contacting the bearing. Dust caps are also used in applications where friction reduction is important due to […]