The diagram of metal hose installation diagram Due to the horizontal and axial displacement generated by the main absorption system of the metal hose, in addition to ensuring the freedom of the metal hose during installation, it can also be absorbed by the layout of the pipeline. In addition, the following factors should be comprehensively considered: the nature of the medium, operating temperature, operating pressure, and the nominal diameter, venue category, connection method, displacement method, etc.
Therefore, the installation length of the metal hose should be smaller than the natural length to ensure a certain degree of freedom. Metal hoses compensate the axial displacement capacity in natural state. There are two common pipe distribution methods.
Therefore, determining the length of the metal hose China push on fittings Suppliers is the primary work. If the length of the hose is too long, it will cause the system’s instability, increase fluid resistance, increase mechanical damage and vibration problems; the length of the hose is too short, and the purpose of compensation, vibration reduction, and noise will not be achieved.
There is also a valve after the metal hose, which makes the tank directly form a soft connection with the pipeline, which is convenient for the maintenance and replacement of the metal hose. Although the installation of the Z -type installation increases the length of the pipeline and the number of elbows, the axial displacement of the tube can be absorbed by itself, reducing the axial stress of the metal hose and the pipe mouth, and extending the service life. The overall layout is neat and beautiful, reducing the length of the pipeline and reducing fluid resistance.
heavydutyy