At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add grease to the lubrication point every week during the running-in period (except for special requirements). When connecting a vertical reducer with an oil pump, pay attention to the direction of rotation of the oil pump. Clockwise rotation is correct.
While keeping the reducer clean, adjust and tighten loose parts in time to prevent the loose parts from aggravating the wear of the parts or causing the parts to be lost.At the end of the running-in period of the hard-tooth surface reducer, the machine should be subject to mandatory maintenance, inspection and adjustment should be done, and attention should be paid to the replacement of the oil.
For non-standard reducer, the operator should accept the training and guidance of the manufacturer, fully understand the structure and performance of the reducer, and obtain certain operation and maintenance experience before operating the non-standard reducer.Pay attention to the working load during the running-in period of the hard tooth surface reducer. Generally,China Cylindrical Gear Reducer Company the working load during the running-in period should not exceed 85% of the rated working load, and a suitable workload should be arranged to prevent overheating caused by long-term continuous operation of the reducer. happened.
Pay attention to frequent observation. If there is an abnormality, stop it in time to eliminate it. If the cause is not found and the fault is not eliminated, the operation should be stopped. As long as you pay attention to and implement the maintenance and maintenance of the reducer during the running-in period, it will reduce the occurrence of early failures, extend the service life, improve production efficiency, and make the reducer bring you more benefits.
helicalgear