When working on your rc car, you need to ensure a gooddefense of the motor. For the fairings will have to make the “U” inaccordance with the distances to save and what we want to stand out of it, makea hole so to come in and get it right. MoreWhen we need to put two servos in the rudder, to getmore strength in large aircraft, we are usually the problem that we have twoservos that move the same, except of course that we put a programmable digitalitem. Try to assemble a steering control with two standard servos common.If you move the controls with rc car servo solidarityit is always exerting force against the other, spending unnecessarily batterycurrent, this method allows that if there is a difference of course, it isabsorbed by the system.
The installation begins to form the tray with accommodation for two servos so that one is about 1cm,but higher than the other as shown in many online videos. Once we have this, weproceed to make two identical pieces of plastic 1.5 cm long and about 4 mmwide, with three holes. It is important that the distance between the holes atthe ends is the same as the servos have height difference.Note that, for a horn to move differently from theother, all that Dc Motor Commutators Suppliers happens is that small rocker switch his position, but bothservos continue to transmit force to the rudder cables:Keep in mind that the separation of the holes in thebeam must have the same separation, it is imperative that the horn to avoiddifferential problems.
If you do not want to use the rocker, you can get thecables directly from the rc car clevis, thus saving a step, but the tension ofthe cables will be made directly on the servo bearings, stick allows us to puttighter cables without this problem. I hope you learn, it’s cheap and available, standardservos join forces without consuming extra. All dreams of mighty long modelersmoke from its model, but as we all know the conventional systems are ratherexpensive and heavy limiting their installation in small models. What do I haveto show you today is a simple smoke generating system and “economic”.The rc car system consists of asmall additional tank that will contain the liquid smoke generator, which willbe connected by a nipple-shaped “T” to the fuel tank pressurization.
hookcommuesk