Daily maintenance of the can crusher
1. Before starting the test machine of the can crusher, strictly check whether the installation of each part of the machine meets the requirements, whether the screws and bolts are loose, you can use the hand to gently pull the belt for trial rotation, and whether there is any phenomenon such as collision with the shell. At the same time, check the direction of rotation, and it is strictly forbidden to crush flammable and explosive materials to avoid accidents.
2. During production, uniform feeding should be maintained to ensure the crushing quality OEM Plastic Crusher Machine suppliers and normal production. At the same time, it is strictly forbidden to overload the motor of the can crusher to ensure the normal operation of the machine.
3. In addition to checking the tightness and looseness of various parts frequently, attention should also be paid to checking the wear and tear of the wearing parts. If the wear is serious, it should be replaced in time to avoid damage to the main components. And take necessary fire prevention measures.
4. Due to the high speed of the can crusher, in addition to the correct and firm installation, good lubrication should be maintained at the same time to maintain the normal operation of the machine. Under normal circumstances, it is normal that the bearing temperature does not exceed 70 degrees. Add butter and molybdenum disulfide to the bearing of the main engine once a week, and the effect of high-speed butter is better.
The similarities and differences between single-shaft metal shredders and double-shaft shredders in production. Metal shredders are gradually being widely used. Due to its simple and easy operation and good crushing effect, the metal shredder will be very good. Development prospects. Metal shredders can be divided into two types according to the working principle: single-shaft shredder and double-shaft shredder.
1, a single-shaft shredder, this type of metal shredder is only equipped with a moving shaft, and the blades are installed on this shaft , And the fixed knife on the box form a form of mutual shear. The main shaft is driven by the motor and the reducer, and the material is driven by the spiral blade to enter the gap between the movable knife and the static knife. Because the blade is spiral, the material will be squeezed, torn and sheared at the same time, so that the material can enter the equipment well and complete the work smoothly.
2. The double-shaft shredder is similar to the single-shaft metal shredder, except that the moving shaft has become two, both of which are inlaid with blades. The two shafts rotate relative to each other, and the material is shredded like a single shaft. Machine operation. The twin-shaft shredder is equipped with two motors, which has enough power to crush some materials with larger shapes and higher hardness.
Tags: OEM Plastic Crusher Machine, OEM Plastic Crusher Machine suppliers
a