iNGENET - La comunidad de la ingeniería mexicana

Let us take a look at the characteristics of roller cone bits: For a long time, people’s improvements to the cutting structure have mainly focused on the main cutting tooth structure. Increasing the drilling speed and service life of the drill bit is the way to reduce the drilling cost. Especially the drill bit used […]

Since the domestic conventional gas is buried at 1,500 meters to 3,000 meters, there is not much difference with the shale gas burial.5 billion cubic meters.) , Drilling fluid, and drilling technology put forward higher requirements. The shale layer belongs to the medium-soft rock layer, and the bit has a significant advantage in drilling the […]

In fact, it is necessary for the craftsman to use the actual use to obtain a suitable actual environment. That effect can crush a part of the rock at the bottom of the well, and at the same time, the shear effect brought by the sliding of the cones cuts away the remaining between the […]

The Brad Point Wood Bits Manufacturers insert type tri-cone bit uses alloy teeth with relatively strong strength and toughness, as well as the optimized number of teeth, the number of teeth, and the high-tech alloy tooth shape, which makes its great use. The cutting effect of the insert is very good and very good. The insert […]

2 straight shank twist drill rolling groove grinding back process principle When the groove is rolled by the groove rolling and back grinding process, the original four-high rolling mill can still be used, but the section shape of the two blade back sector plates is changed, that is, there is no blade groove. At this […]

Because these tasks are dangerous, their safety is worthy of our attention. Without tri-cone bits, this work cannot be carried out. There is no need to worry about cracking and deformation caused by temperature changes; this material can adjust the temperature and humidity of the living environment, which is also a point we are more […]

With the development of science and technology, many energy pipelines are buried underground for construction. This can also prevent us from suffering some economic damage. Especially in some places of the residents, the application must be paid more attention to.If you want to use a tri-cone bit, you must follow the relevant national regulations during […]