Users can improve the display clarity by adjusting the (blue) potentiometer on the internal circuit board of the control system. For specific operations, see the instruction manual.
① The liquid crystal display adjustment potentiometer RV2 of the 95 model is located (under the table) between the two flat sockets on the right side of the main control board (E9501) in the control box (see Figure 1).
②The LCD brightness/contrast adjustment of the 18/28 model is carried out through the operation panel keys.
③ The LCD adjustment potentiometer of the 08/02/52 model is located in the operation box (above the table).1. Protection of LCD screen The liquid crystal display should be protected from direct sunlight and cannot be touched with Spray Printing Embroidery Machines hard objects to avoid scratching the liquid crystal surface and causing permanent damage.
Liquid crystal displays may have different clarity of graphics or characters due to different brightness of the lighting and different viewing angles of the operator. The potentiometer can be adjusted through the adjustment hole on the back cover of the operating box
mixedembroidery