Imagen de avatar Best IP65 Batten Lights
Ningbo SANITY Lighting Electric Co.,Ltd

In The Second Stage

This structure, made from a form of photonic crystal, captures the excess radiation produced by the wire and reflects it Non corrosive fixture back to the filament, where it becomes re-absorbed and re-emitted as visible light.The first stage involves making a regular incandescent light bulb with a conventional heated metal filament.The challenge for the researchers was in finding a material capable of reflecting the infrared radiation while still allowing the visible light to shine through.effectively recycling light in the process.”The nanophotonic interference system developed by the researchers gives their preliminary incandescent bulbs almost a threefold improvement in energy efficiency over traditional bulbs, achieving 6.

While this isn’t yet as effective as CFLs (between 7 and 13 percent) or LEDs (between 5 and 13 percent), the team believes the technology could reach efficiencies as high as 40 percent in the future, meaning the system might one day see a return of incandescent bulbs to supermarket shelves.Until that point, today’s energy-efficient bulbs are the way to go, say the researchers.“People should buy LEDs,” said a member, Marin Soljacic. “Conventional photonic filters usually operate for a single incidence angle.”end-of. But what if there were a way of harnessing that excess heat and energy and using it That’s exactly what the researchers at the Massachusetts Institute of Technology have reportedly done, developing their “light recycling” light bulbs in a two-stage process.6 percent.

It also produces lots of excess radiation we can’t see, including infrared, which ultimately means more than 95 per cent of the energy that goes into incandescent bulbs is wasted, most of it as heat.Incandescent bulbs work by heating a thin wire — usually tungsten — to an extremely hot temperature of about 2,700 degrees Celsius. The challenge for us was to extend the desired optical properties across all directions. In the second stage, the researchers create a structure that surrounds the filament. “But understanding these basic properties (of light and heat) is very important to a wide variety of things.“The key advance was to design a photonic structure that transmits visible light and reflects infrared light for a very wide range of angles,” said one of the researchers, Ognjen Ilic.The researchers behind the new bulb say that if the technology reaches its potential, it could offer vast electricity savings over today’s conventional energy-efficient lights such as compact fluorescent bulbs (CFLs) and light-emitting diode bulbs (LEDs). The intense heat causes the wire to emit visible light, but that’s not all


Deja un comentario