China is at the forefront of the international level in the wide application of powder coatings, but there is still a lot of room for development.0% are used in agriculture, construction machinery and automobiles.The restructuring of small-scale enterprises with poor reserves, poor production environment, backward equipment, and small scale is the only way to go.
Although my country is a big country in the production and consumption of powder coatings, it cannot be said to be a strong country in the development and production of powder coatings. But only 6. The summary report made by the German representative when participating in the China Coatings Annual Conference is very complete. There is no mention of powder coatings. In developed countries, the proportion of powder coatings used in the automotive industry is about 10-15%, while the amount of powder coatings used in automobiles in my country is not even 2%, and there is still a lot of room for development.
This is due to the coating process and baking the part in the oven after coating. The most important thing to remember is that powder coating works on metal parts. One thing to keep in mind when collecting and reusing too much spray is that it cannot be mixed with other colors, as this may affect the completion of future projects, as it may occasionally include different colors. The coating layer has excellent chemical resistance, aging resistance, impact resistance, bending resistance, and acid resistance.
If stored in an air-conditioned room, the powder must be stored at room temperature China polyester powder coating Manufacturers or the same (temperature) as the spraying equipment before use to avoid re-moisture.For powders with low temperature curing type and gloss below 40% (60°), the storage temperature should be lower than 30°C.
Corrosion resistance, crack resistance, and excellent adhesion, no matter whether the metal surface is galvanized or aluminized, the adhesion of the material is absolutely reliable, and it also has the smooth decorative performance of the coating surface.
paintcoating