In these contents, some are also applicable to universal shafts, so I hope that everyone can study hard in order to be able to master it in time. Hereinafter, It does not say more nonsense, to launch specific content. The general direction or the drive shaft, its maintenance work is: Starting with high speed gears, or the fierce is started. So below, It to make this work so that everyone can Drive Axle Suppliers know more about the product, so that you can know more of this.
The carrying is more reliable because of the overall fs.As mentioned in the universal coupling, everyone may have some understanding of it, because the introduction of this aspect is preceded. At the same time, we must ensure that the center line of the middle two welded head bearing holes should be on the same plane, which allows the deviation that cannot exceed 1 degree.
The characteristics of the crosshair couplings are: reliably transmitting torque, and moving, and has a large angular direction compensation. The structure is compact, high drive efficiency, low noise, convenient maintenance, and long service life. After you want to brush the anti-rust paint, then paint.
The total gap should meet the requirements. The working principle and characteristics of the universal coupling are introduced in front, so let’s change the topic, let’s talk about the aspect of the crosshair couplings. . Assembly technology, in the assembly process, first remove the burr and clean all parts.
Assembly requirements Between the semi-circular slide and the fork, it should be uniform, and the contact area cannot be less than 60%. However, if you want to fully understand the universal coupling, we will continue to work hard, because there are still many we don’t know.The spline portion should be able to slide smoothly, and the joint should be flexible
Tags: Drive Axle Suppliers
partscv