After more than ten consecutive days of measurement, it is found that the surface temperature of the cabinet is always 8-10 degrees higher than the ambient temperature, which is a normal temperature range.The gear box body of a leveling machine has China Cycloidal Gear Reducer Manufacturers been hot, and the workshop technicians reported that this has happened for a long time, and the reason cannot be analyzed.
Therefore, when taking the maintenance class to stop for maintenance, disassemble the box body, replace with new oil, reinstall, check the friction pairs and seals, replace slightly undesirable parts, and install carefully. This temperature made it impossible for human hands to touch it for more than 2 seconds, which can be said to be unstoppable.. It is found that the temperature rise has been significantly reduced when the other conditions of the equipment have not changed.
When the technicians had no countermeasures, they used the industrial gear oil of nano gold oil, and then carried out the tracking measurement. The box temperature rises after the rolling mill has been running for a while. However, when tracking and testing the reinstalled reducer, it was found that the temperature rise phenomenon remained the same. After more than ten days of continuous tracking and measurement, it was found that the surface temperature of the cabinet was always 30 to 32 degrees higher than the ambient temperature.
At that time, the temperature in summer was above 30 degrees, and the surface temperature of the gearbox box reached 62 to 63 degrees. The workshop also used a lot of brains, thought of a lot of methods, conducted a lot of discussions, and always thought that there was a problem with the equipment installation
planetaryreducerr