The repaired surface has comprehensive advantages such as high wear resistance, high heat resistance, high strength, and corrosion resistance. The sludge pump is generally used for conveying sludge and papermaking sludge before dewatering treatment. The hydraulic design of the lifting impeller has no entanglement and blockage; 2.. Then, we can apply our materials for pump scouring and abrasion repair to the abraded part. The working environment of the sludge pump is harsh. The process of repairing the scouring and abrasion of the sludge pump with this material is quite simple.
The main features are as follows: The sludge transfer pump is a kind of conveying machinery used to discharge high viscosity concentration. For the sludge dewatered by the filter press The mud is generally transported by a rotary pump. Because the sludge contains a large number of solid particles and corrosive liquids, it is easy to cause serious erosion and corrosion of Borehole Pumps Manufacturers the pump casing and cause damage.
The installation is convenient and rapid, and can be used in pools of any shape. Complete the repair. Simple operation, easy maintenance, low power and no noise. Small footprint; 4. Firstly, the surface of the abraded part of the sludge pump is sandblasted, and then a special primer is applied. Soleil carbon nano polymer material has excellent mechanical and physical properties. Under the premise of normal maintenance of the sludge pump, the repaired surface The service life is even higher than the service life of new parts. The shaft and oil chamber have advanced and reliable seals, and have anti-leakage protection; 3
The solution is to crank once every 8h and rotate the shaft 120 degrees in the same direction each time. Some large pumps will change after using for a period of time. Due to the weight of the impeller and rotor, especially the large machine pump, when the machine pump stops working for a long time,
pumpjet