The 5″ Borehole Motor becomes too large a. Replace parts such as bearings. It is possible that the power supply is reversed, causing the device to reverse. d. d. Stabilize the pipeline to within the normal pressure range. f. c. c. The motor running time of the equipment is too long and lack of maintenance. b. b. The pipeline can be inspected as a whole, and the blocked place can be opened up. Check the pipeline and repair the leaking place. Water leakage occurs a.
The motor heats up for no reason a. Standardize the operation to reduce bumps. There is a possibility of air leakage in the equipment pipeline. b. Replacement of wearing parts and other accessories. Standardize the operation and adjust the flow rate to within the normal range. The voltage has not reached the rated voltage.
Adjust to the correct rated voltage. The suction lift at the entrance is too high, causing water leakage. The continuous working time is long, resulting in a flow exceeding the specified range. Insufficient water pump flow a. b. d. c. a. Check the whole fittings and strengthen the bolts.
Adjust and stabilize the specified rated voltage. The rated voltage is not reached. a. The water pump does not deliver water a. The common failure phenomena are listed below, as well as the causes and solutions of the failures as a reference: Failure phenomenon Solution to the cause of the failure 1. Abrasion occurs inside the enclosed equipment. Shut down for overall inspection to reduce vacuum and avoid cavitation. The accessories such as bearings are damaged. Check whether the pipeline is blocked because the valve at the inlet or outlet is closed. Adjust to the correct rated voltage
Tags: 5" Borehole Motor
pumpjet