6. Installation of self-priming Deep Well Pumps Manufacturers 1. If the gap between the bearing and the shaft sleeve is greater than 0. 5. 3. The materials of the flow-through components are made of corrosion-resistant stainless steel, corundum ceramics, tetrafluorographite and other materials. 2. 6. 4. Unscrew the water-filling bolt on the top of the pump, add two-thirds of the storage water less than the pump body volume, and tighten the bolts.
The use temperature of the metal pump is <100℃; the specific gravity of the medium being transported is <1.5~2mm in the axial direction, the bearing and axial moving ring should be replaced. The suction height is 4 meters. ring.3, the technical performance will be affected.
The pump is a medium that is easy to precipitate and crystallize. The self-priming magnetic pump has compact structure, beautiful appearance, small size, low noise, reliable operation, convenient use and maintenance. 3. If the conveyed medium contains solid particles, a filter should be added to the pump inlet: if it contains ferromagnetic particles, a magnetic filter should be added. The pump and pipeline should maintain a good seal.5~1mm and the impeller moves 1.
The self-priming magnetic pump can be widely used in petroleum, chemical, pharmaceutical, printing and dyeing, food, scientific research and other units to pump acid, alkali, oil Class and rare precious liquids, venoms, volatile liquids, and circulating water equipment, especially for the pumping of leaky, flammable, and explosive liquids. 5.
In actual work, the elimination of vibration should be combined with experience and theoretical analysis, and the vibration mechanism analysis and the data obtained by the actual detection instrument should be combined. The pump runs relatively stable under design conditions, but when operating under variable conditions,
pumpjet