Shift back the guard to its regular positionand reengage the tool taking all required safety precautions. Position itaround 170 degrees at the back compared to its initial position, revealing thusthe blade bolt and locking pin of the saw. First, the blade guard has to be bypassed, so slightlyslide up the guard to gain access to the screw holding the miter saw to theguard.. As it is always dangerous to handle a blade, just stay focused on thetask that needs to be completed.
Take away the flange andchange the blade. Check the rightworking order of the saw by making a couple cuts. Press down the locking pin of the saw and rotate theblade till it is locked. In mostcases, the blade bolt is reversing threaded, but that is not always the case. Put in the new blade just as you have taken away theold blade. It is quick and easy to replace a miter saw blade, butit should be conducted with care and by taking certain safety precautions.
The saw needs to be turned off and unplugged. Itis important to always have a well maintained and sharp blade as it issignificantly improve your work results along with your safety. Change the flange along with the blade bolt, double checking thatyou have securely tightened the blade bolt.As a result, try to find a sign on the tool for the right direction to loosethe bolt or just check the saws manual in advance.
Release the screw to slide further backward the blade Grub screw guard. Take away the blade bolt with an Allen wrench. Glide forward the blade guard and tighten the screwwhich holds it to the miter saw.The change of the miter saw blade first require somegeneral safety precautions.Before working on any power tool, ensure that it is impossible for the tool toturn on
chicagoscrews