The mold protection system of the injection molding machine is installed on the injection molding machine. It can directly check whether the product is qualified, and check the residue before clamping to prevent the mold from being damaged. When the injection molding machine chair mould manufacturers is running, expensive molds may be damaged due to plastic residue or slider misalignment in each cycle.
Ampoules prevent these from happening and automatically prevent mold closing and alarm when an abnormality occurs. Mold maintenance precautions: When disassembling the mold, avoid bumps, the movement should be smooth; the mold anti-rust should reduce the mold temperature to below 40 degrees; the mold should be thoroughly inspected and rust-proofed: carefully dry the cavity, core, Eject the moisture and debris from the mechanism and the position, and spray the mold rust inhibitor and spread the butter.
Daily maintenance of mold: regular rust removal (appearance, PL surface, cavity, core, etc.), regular re-lubrication (ejection mechanism, row position, etc.), regular replacement of wear parts (rods, bolts, etc.). The maintenance of the lower mold requires professional maintenance personnel to remove the mold and perform professional maintenance and repair on the mold cavity and thimble of the mold.
ZHEJIANGHUAQI