Correctly grasping the location of the bearing in the mechanical device and the conditions of use and environmental conditions are the prerequisites for choosing a suitable bearing. In order to do this, it is necessary to obtain the following data […]
It is necessary to select a bearing that can move the rolling surface
julio 21, 2021 por standardbearingTags: China INA Bearing Suppliers
Publicado en nmrbearing.com| No hay comentarios 
Check the gas and coal dust concentration in explosion-proof areas
junio 16, 2021 por standardbearingWorksheet: Approval form for safety technical measures. A dedicated person is responsible for applying to the centralized control room to go through the procedures for power outages of related equipment and clarify the contents of the maintenance; After the centralized […]
Tags: China mechanical bearings
Publicado en Sin categoría| No hay comentarios
The lubrication condition deteriorates
mayo 26, 2021 por standardbearingThis is the case when the bearing of LY’s limestone crusher is heated. If a shaft with a length of 3m is installed in summer, the maximum shrinkage in winter (when it is stopped) can be close to 3mm. Generally, […]
Tags: SKF Bearing Suppliers
Publicado en nmrbearing.com| No hay comentarios
The wave of large-scale application of ceramic bearings has surged
abril 29, 2021 por standardbearingThe use temperature is between 100C and 800C without expansion due to temperature difference. 3. The rings and rolling elements of ceramic bearings are made of all ceramic materials, including zirconia (ZrO2) and silicon nitride (Si3N4) silicon carbide (Sic). The […]
Tags: China roller bearings manufacturers
Publicado en nmrbearing.com| No hay comentarios
It is not allowed to change during design and manufacturing
abril 21, 2021 por standardbearingTherefore, there is no national standard for external dimensions of this type of bearing. It has a double raceway outer ring and two inner rings. Deep groove ball bearings are mainly used to bear radial load, but also can bear […]
Tags: SKF Bearings
Publicado en nmrbearing.com| No hay comentarios
Different types of bearings require different grease frequency
marzo 22, 2021 por standardbearingFor bearings equipped with pipe fittings and oil drain holes: Remove the lower oil drain plug; clean out all hardened grease. Many rolling bearings require a small amount of grease to be added between grease flushing intervals. While removing the […]
Tags: Wholesale Mechanical ball bearings manufacturers
Publicado en nmrbearing.com| No hay comentarios
The bearing is well lubricated under heavy load and high temperature
marzo 1, 2021 por standardbearingIf the inner ring of the bearing produces fretting wear, both the inner ring and the journal of the rolling bearing can be repaired on site with metal brush plating technology. Technical requirements for bearing bush scraping According to the […]
Tags: Mechanical ball bearing Factory
Publicado en nmrbearing.com| No hay comentarios
standardbearing