These things have to be disconnected. Step III – Free The Driver, Rear and Passenger Side Shocks – Many things from the exterior of the vehicle are connected to the side shocks like the brake-line brackets. At the end of the shock component, you will see that the bottom shock fork is attached to the control arm of the suspension using a bolt. You can install coilover components and Weapon R intake without any trouble, if you follow the right procedure. Some notched collars keep in place the coilover shock bodies in the lower half and you can use the collar wenches to loosen them. Perform the same process on the side shocks on the passenger side and rear shocks as well. You also need to remove rear assemblies in the same manner.
There will be two nuts and when you remove them, you will see that the spring and shock structure fall free. Now, the entire car would be lifted and all corners have jack stands for support. In the engine bay compartment, you have to look over each of the shocks and remove the upper tower nuts. If you are planning to install coilovers in your car, here&39;s how you can do it – Step I – The Jacking Procedure – Choose a flat solid surface to park your car. After you remove the stock suspensions, install your coilover kit and put all the components back.
Ksport coilovers have better shock setup and are adjustable as well. The ride height is comparatively lowered and you can handle your car better. If you want to reduce the riding height of your vehicle, thread it upwards and so on. They are usually located on the inside area of the wheels. The same procedure has to be repeated for the passenger side of the vehicle. You have to remove this bolt and then pull the suspension arm downward once it is free. 4. Some people prefer normal stock suspensions but coilover suspensions are better. You can do this with the help of a socket wrench. Step IV – Install The Coilover – Before you install the coilover on the vehicle, just set up your kit first. You can use jack stands right under the jack supports near the chassis.
It is very easy to install these things on your own and save money. This would free the wheels and you can put them aside to have a clear view of the suspension components. Step II – Access Suspension Components – The wheels have lug bolts which need to be removed. Tighten the wenches once you large plastic funnel reach your desired height.. You can get the exact height that you want without any hassles. You have to thread the shock body (lower) along the shock assembly and there is a rule to it. Now, use a floor jack to lift the driver&39;s side of the vehicle.The main reason why people install coilover suspension in their car is because of the overall additional stability it adds to your vehicle.
Tags: Plastic sealing clips
storagebox