Archivos » Categoría ‘jointcage.com’

Domestic neural networks and expert systems both use frequency-based signal characteristics

Miércoles, mayo 12, 2021

At present, domestic neural networks and expert systems both use frequency-based signal characteristics. The different frequencies are shifted and stretched, and the frequency band information can be selected selectively, effectively reducing noise interference, and avoiding the amount of information that […]

What are the classifications of fixed and removable rigid couplings?

Domingo, abril 25, 2021

The torque is transmitted by the teeth of the internal and external teeth. Fixed rigid coupling It is composed of two semi-circular pig iron clamp shells, which are clamped with anchor screws. Universal coupling, suitable for medium speed It is […]

What are the common faults of drum gear couplings?

Lunes, abril 12, 2021

Drum tooth is made of external teeth into a curved surface. If the drum-shaped gear coupling is installed too large, it will very likely cause the head clearance of the drum-shaped gear coupling to disappear. The gear coupling is composed […]

The effect of the operation can be truly guaranteed

Martes, marzo 30, 2021

Maintenance is required so that the coupling can be kept in good condition when China Drive Shaft Suppliers it is operating. The direction of rotation and the magnitude of the torque are not changed during the movement. Alignment: For good […]

What are the reasons for the vibration of the universal joint shaft?

Lunes, marzo 15, 2021

When the universal joint shaft is used, it will sometimes produce a certain vibration due to shaking. When the universal joint is bent and the shaft tube is recessed and the drive shaft is assembled, the mark does not tend […]

Make the coupling have the performance of compensating for various offsets

Martes, marzo 2, 2021

Fixed coupling: the centerline of the two shafts to be connected is required to be strictly aligned; Removable coupling: allow a certain installation error for the two shafts. In fact, in the working process, the two shafts are always in […]

Everyone’s technical engineers have basically improved the structure of the original cardan shaft

Viernes, febrero 26, 2021

In addition, a grease nipple with a protective shell is dried on the top of the rolling bearing for convenient filling of grease. Then, the slab heated to above 1300 degrees is extruded and deformed, and the thin and thick […]

Transmission service is an important maintenance of your car and vehicle

Sábado, febrero 6, 2021

When a car is damaged or malfunctions, it is very important to repair it. Therefore, when your vehicle is damaged and cannot work normally, car repair is essential. But first, you must determine the problems with your car, and then […]