iNGENET - La comunidad de la ingeniería mexicana

(1) According to the load inertia and the motor inertia, select an appropriate pseudo-selected motor specification.
(2) Calculate the load torque according to the load weight, configuration method, friction coefficient, and operating efficiency.
(3) Calculate the acceleration torque and deceleration torque based on the initial selection of rattan ruler electromechanical inertia and load inertia.
(4) According to the requirements of operating conditions, select the appropriate load inertia calculation formula to calculate the load inertia of the mechanism.
(5) Calculate the continuous instantaneous torque based on the load torque, acceleration torque, deceleration torque and holding torque.
(6) Clarify the requirements of the motion conditions of the load mechanism, that is, the speed of acceleration/deceleration, the motion speed, the weight of the mechanism, and the motion mode of the mechanism.
(7) The maximum output torque of the primaries must be greater than the acceleration torque + load torque; if the conditions are not met, other models must be selected for calculation and verification until they meet the requirements.
(8) The rated torque of the primary selected China AC Gear Motors Manufacturers must be greater than the continuous instantaneous torque. If the conditions are not met, other models must be selected for calculation and verification until it meets the requirements.