The activated carbon filter has two main functions: 1. In order to further purify the raw water and make it reach the water intake index of the system, an activated carbon filter is designed in the process flow. Generally, they cannot be removed by gravity and natural sedimentation.
Material polypropylene filter element, deep filtration, has the advantages of large dirt holding capacity, long life, and easy replacement.1mg/L.1MPa) should be replaced. The raw water pump determines the working point beer fermentation tank factory of the raw water pump according to the design pressure drop and required flow rate of each pretreatment equipment, so as to select the best model.
If there is a leakage, some particles will penetrate into the reverse osmosis membrane, causing the membrane to be blocked. The stability of the colloidal particles is made to flocculate into larger particles. Primary reverse osmosis host in the protein beverage production line (1) Overview of reverse osmosis technology Reverse osmosis technology is currently a more mature and effective desalination technology. Activated carbon is not simply adsorption during the entire adsorption and dechlorination process, but catalysis occurs on its surface.
Because it is opposite to the direction of natural penetration, it is called reverse osmosis. High-pressure pump reverse osmosis membrane uses the concentrated solution side to apply high pressure to achieve the solvent flow from high concentration to low concentration. Determine the working point of the pump according to the relevant data of the selected membrane and the arrangement of the membrane tube, so as to select the best model.
systemmicro