At this time, the cooling water pipeline valve of the condenser should be opened. After cleaning and passing the necessary safety inspections, the next batch of drugs can be processed. During the extraction process, a pump can be used to extract the liquid medicine from the lower outlet as needed, and pump it into the top inlet of the tank for forced circulation, so that the temperature in the tank is balanced and the extraction effect is sufficient.
The auxiliary equipment and pipeline system should be cleaned with tap water. Before using the extraction tank, close the slag discharge door and observe whether it is properly closed (locked in place and sealed).If extraction at a higher temperature is required, the secondary steam of the steam at high temperature can be allowed to enter the condensed liquid in the upper part of the extraction tank, and then return to the tank for reflux extraction
The volume is 100L-4000L and other specifications, and can also be designed and processed according to the actual needs of customers. 6.28～0. It is manufactured, tested and accepted according to the ‘Pressure Vessel’. 7.28?m-0. The interface adopts the international general ISO standard quick-mounting chuck type, the inner tank is imported 316L or 304, the inner surface is mirror polished Ra0.
The medicine dispensing tank container has the function of heating and heat preservation. The characteristics of the medicine dispensing tank: 1.3Mpa or normal pressure .Sterilization temperature: 121℃～132℃. Working pressure: normal pressure .Working Wholesale Industrial brewing System temperature: 80℃～95℃ Medicine dispensing tank configuration:reduction device (magnetic stirring).folding microporous membrane air filter (filtering out ≥0. 4.45μm .Exterior material: 304 mirror panel or sub Light board .Heating coil: 304 .Insulation material: Pearl cotton (high temperature resistance, anti-aging) .Surface temperature: ≤20℃.
systemmicro