The main content of the CNC bearing lathe design is the determination of the main parameters Rapid Prototyping Service of the machine tool, the drawing of the transmission scheme and the transmission system, and the design of the two-way flat friction clutch. The start-stop device is used to control the start and stop of the spindle. According to the customer’s actual processing needs, the optimized design ensures that the processing rotation diameter of the workpiece is 250mm-600mm, the processing outer circle diameter is 100-300mm, and the processing length is adjustable from 120-500. Pneumatic spring chuck 2, manual chuck 3 hydraulic chuck
The way to install the knife is the row of knife holders .CNC bearing lathe is an alternative to instrument lathe. The specially designed pre-tightening force of the CNC bearing lathe enables the spindle to have higher speed and rigidity. The machine tool adopts a hydraulic moving tailstock structure, and the CNC bearing lathe can be connected to the machine tool.CNC bearing lathe has high cost performance
CNC bearing lathe has high cost performance. The CNC bearing lathe can guarantee the machining accuracy for a long time. The CNC bearing lathe is the start and stop of the main shaft and the reversing device. The hardness is above 45 degrees hrc. The reversing device of the CNC bearing lathe is used to change the rotation direction of the main shaft. Low-priced machine tools, high-performance machine tools, CNC bearing lathes have a higher cost performance.
The design of CNC bearing lathe is mainly aimed at the main drive system of hydraulic chuck multi-tool imitation lathe. Numerical control bearing lathe has a variety of workpiece clamping methods for users to choose1. The function of the main drive system of the CNC bearing lathe is to support the main shaft, drive the main shaft to rotate, and make the main shaft start, stop, change speed, change direction, etc.
cardecorative