Generally, the worktable cannot be set too large, and the load-bearing capacity is relatively small, especially when the torsion axis A is rotated to 90 degrees or greater than 90 degrees. , It will bring a very large load-bearing moment to the worktable when processing the workpiece. The A and C torsion axes of a five-axis vertical machining center can be placed in different positions. For example, the A and C torsion axes can be placed on the workbench and the spindle or can be placed on the workbench or the spindle separately.
The position of the A and C torsion placement of the five-axis vertical machining center is mainly determined by the product. The A and C torsion of the five-axis vertical machining center, which is common in the market, are all placed on the worktable. Two,Automotive Interior Trim Cnc five-axis machining center torsion shaft varieties 1. Five-axis vertical machining center A and C torsion shafts are placed on the worktable.
Generally, there are many ways to place the A and C torsion shafts on the worktable, and they are also in the market. Seen a lot. This type of torsion axis placement method is limited in size and cannot process larger workpieces or load-bearing machining centers, due to the limited torsion load-bearing capacity of A. The A and C torsion shafts of the five-axis vertical machining center are arranged on the main shaft. There are few ways to place the A and C torsion shafts on the main shaft. This type of A and C torsion shaft arrangement method is used for processing larger workpieces. Its load-carrying capacity is stronger than the installation method of A and C torsion placed on the workbench.
Therefore, this type of A, C torsion axis placement method will be applied to the processing of larger size workpieces.The A and C torsion axes of the five-axis vertical machining center are respectively placed on the worktable and the spindle. Under normal circumstances, the A torsion axis will be placed on the spindle, and the C torsion axis will be placed on the worktable. This kind of A, C torsion axis The placement method is also relatively rare, it can process larger size workpieces, and the load capacity can also be grabbed.
cardecorative