Worm gear reducers are widely used in transportation and machinery industries. As a kind of power transmission equipment, the transmission of this equipment structure is mainly based on lubrication and friction, and lubricating oil is very important. In addition to choosing the right one, we should also take preventive measures in various situations. For example, oil return is a common problem, so how should we prevent it? Let’s take a look:
1. Set the reducer and auxiliary mechanism, and cut off the oil circuit when the reducer is stopped.
2. Add a pipe to the oil hole so that the oil level is only slightly higher than the oil inlet.
3. The base surface of the worm gear reducer should be flat and the valve plate should be flexible.
4. The shaft seal and the sealing parts of Hejing must be firm and replaced in time.
5. Move the oil tank and exhaust valve to one side to lower the oil level and reduce the amount of oil.
6. Set the check valve mechanism as a worm gear reducer, and the oil inlet will be automatically closed when the reducer stops.
7. Separate the oil near the exhaust valve of the China Brake AC Motors from other oils, and the oil level is only slightly higher than the partition wall.
8. Install an inflation valve on the reducer port of the reducer.
gearprecision