Of course, we must do a good job of anti-corrosion work for high-pole lamps.High pole lights are used outdoors for a long time. Under normal conditions, the body of the high pole light pole should not be welded on site. It is necessary to correct the damaged zinc layer for high pole lights, and this operation can be completed with zinc-rich paint.
The daily repair of high-pole lights includes a thorough and careful inspection of lamps, light source appliances, cables and other equipment. If damaged lamps or cables are found, they must be replaced in time, and all the bolts that fix the high-pole lights are loose or not.
Therefore, high pole lights must be regularly maintained and replaced by professionals to improve the service life of high pole lights. Next, let everyone see how high-pole lamp manufacturers do anti-corrosion work for high-pole lamps. When welding is unavoidable, the galvanized layer of the welded part should be ground off before welding, and the damaged zinc layer must China Customize led street light factory be corrected after welding.
A large amount of sparks and welding slag will occur during welding, and the smoke on the surface of the zinc layer is also very risky. The safety of personnel should be ensured. It is strong and reliable, and it is necessary to replace it immediately if the rust is severe. Wind, sun and rain are inevitable. To ensure safe and stable operation
highbaylight