Turn off the motor switch, and insert the motor power plug and controller plug into the corresponding sockets. For security and anti-theft, the rectangular cavity is equipped with a sealed door, and a special lock is installed on the sealed door. The main and auxiliary steel wire ropes are made of high-strength corrosion-resistant 6*19 non-rotating galvanized steel wire rope. Hold the controller 5 meters away from the pole to operate.
Lamps: The lamp is equipped with aluminum die-casting shell, tempered glass translucent cover, protection grade IP65; Light source: High pressure sodium lamp with long life, high efficiency and low energy consumption is adopted. Natural light should be used effectively. IP66 Led street lights fixtures supplier Press the up button of the controller, the motor rotates forward, and the lamp panel rises steadily along the lamp pole.
High pole lamp installation instructions—installation significance Night lighting plays an important role in shaping the overall atmosphere of the night environment; night lighting is indispensable in life. High pole lamp installation instructions—technical points . Choose a reasonable facade lighting method, control the lighting area, and reduce power consumption. It is conducive to safety, comfort and correct identification of the surrounding environment.
Hold the controller 5 meters away from the light pole to operate. Close the triple MCB, click the controller button, check the relay pull-in condition, and turn on the motor switch when it is normal. The requirements of the light pole: the top of the lift-type high pole light is equipped with a lightning rod, a rain cover, a pulley block with a 60-degree distribution and a hook system with a 120-degree distribution.5 meters above the ground (lower limit), close the triple circuit breaker, unplug the motor and controller plug, and close the sealed door..
highbaylight