The parts to be checked include the water level and water quality of the water tank. The air outlet of the condenser of the brewed beer equipment should be well ventilated. In addition, always check and clean the dispenser and wine tip.
The brewing beer equipment cannot be stainless steel Bright beer tanks factory installed at an angle, it must be kept upright, and it is not recommended to move it frequently. Note that the motor cannot be exposed to water, so be careful not to splash water on the motor during maintenance. If you do not use it in a short time, you should drain the water in the machine, clean the outer wall, and place it in a dry place after packaging.
If necessary, use a special detergent to clean it, and then rinse with water. If necessary, high-pressure air can be used to blow off the dust, or combined with a brush for cleaning. If the sealing rubber ring has no elasticity, it must be replaced. When you stop making wine, unplug the power plug, turn off the switch of the carbon dioxide bottle, and turn the knob of the pressure gauge back. Don’t change it without authorization, otherwise it is easy to malfunction.
Self-brewed beer equipment requires meticulous maintenance. If you must move, unplug the power plug first, stop the power supply, and keep it upright when moving. If there are obstructions around it, it must be removed. Brewing beer equipment needs to be checked regularly. Generally, the automatic temperature control device is installed in the brewing beer machine
homebrewhouse