The microporous filter is composed of a foldable microporous membrane filter element and a stainless steel outer cylinder. It is very convenient to install and remove the filter element and clean the filter. Filter inlet and outlet interfaces: quick-install chuck, SMS round thread, flange, inch pipe thread and other interface forms, filter working pressure: <0. The filter material is high-quality stainless steel (304/316L), both inside and outside are finely polished, and there is no dead corner.
The inner surface of the filter is mirror polished (roughness Ra≤0.1um, 0. The filter cylinder is connected by a quick-fit clamp or a quick-opening ring bolt.28μm), there is no hygienic corner, and it meets the requirements of ‘FDA’ and ‘GMP’. The filter cartridge has 1 core, 3 cores, 5 cores, 7 cores, 9 cores, 11 cores, 13 cores, 15 cores. But we all know that any machine has its own method of use and precautions when it is in use, and the same is true for the microporous filter, so it is necessary to understand stainless steel beer tanks factory its use. It is equipped with a single or multi-core filter element. The microporous filter is divided into chemical grade and food grade.
The microporous filter has the advantages of small size, uniform pore size, fast filtration speed, small adsorption capacity, large filtering area, no media shedding, and no pollution of the filtered liquid. It is recommended that the customer clean or replace the filter element. Food grade must be manufactured according to FDA standards.22um, 1um, 3um, 5um, 10um, which are divided into hydrophobic (for gas) and hydrophilic (for natural liquid) filter elements.
Can be selected according to needs. The length of the pleated filter element is 10, 20, 30, 40. Before starting the machine, first check whether the pressure pump rotates in the forward direction, whether the connection is tight, and whether the valves are closed.5MPa, the working temperature of the microporous filter is 5～85℃. If the filter pressure difference is greater than 0. Slowly open the inlet valve before starting the machine, exhaust the air, and then open the outlet valve for normal filtration.
The filter pore size is: 0. Microporous filters are widely used in food, beverages, pharmaceuticals, and biological products , Water treatment, wine, electronics, petrochemical and other industries pre-filtration and terminal precision sterilization filtration.1Mpa or the flow rate drops significantly, it indicates that most of the pores of the filter element have been blocked. Thoroughly clean the filter and the filter connection parts, correct Install the filter element and housing. The filter element is made of polypropylene, polytetraethylene, and cellulose acetate.
homebrewhouse